UP TO 4X LONGER LIFE AND 15% FASTER CUT THAN HSS CUTTERS!! *Watch the Video Below*
Features:
- CarbideMax TCT Annular cutters are for the most extreme drilling depths through thick metal, box sections or stacked plate.
- The CarbideMax 150mm Broach Cutter has precision drilling flutes and a specially engineered geometry for accurate cutting.
- These cutters come with a standard 19.05mm Weldon shank for use in any magnet drill with sufficient stroke.
2 Piece Pilot Pin:
- Used when drilling material greater than 50mm thick.
- When the pilot pin reaches the extent to which it can retract inside the magnet drill arbor, the bottom section of the pilot can be removed to allow the hole to be completed without removing the pilot pin from the cutter.
Downloads:
RPM Data & Best Practice Guide